General Technical Specifications |
Input/Output frequency range |
400 MHz to 7300 MHz |
IF bandwidth |
400 MHz |
Input power range |
+30 dBm peak (+25 dBm average) |
Output power range (CW) |
+10 dBm to -100 dBm(400 MHz to 6500MHz)
+5 dBm to -100 dBm(6500 MHz to 7300MHz) |
Input power accuracy |
Specification: |
± 0.5 dB (+25 dBm to -40 dBm) |
Typical: |
± 0.3 dB (+25 dBm to -40 dBm) |
Output power accuracy |
Specification: |
± 0.75 dB ( +10 dBm to -90 dBm,400 MHz to 6500MHz)
± 1.50 dB ( -90 dBm to -100 dBm,400 MHz to 6500MHz)
± 0.75 dB ( +5 dBm to -90 dBm,6500 MHz to 7300MHz)
± 1.50 dB ( -90 dBm to -100 dBm,6500 MHz to 7300MHz) |
Typical: |
± 0.5 dB ( +10 dBm to -90 dBm,400 MHz to 6500MHz)
± 1.0 dB ( -90 dBm to -100 dBm,400 MHz to 6500MHz)
± 0.5 dB ( +5 dBm to -90 dBm,6500 MHz to 7300MHz)
± 1.0 dB ( -90 dBm to -100 dBm,6500 MHz to 7300MHz) |
Input/Output integrated phase noise |
≤ 0.3 degrees (100 Hz to 1 MHz)
0.2 degrees (100 Hz to 1 MHz) typical |
Input spurious (signal applied) |
< -70 dBc (CW, for signal levels greater than -10 dBm) |
Output spurious (in channel) |
Specification: |
≤ -40 dBc(320 MHz, >-55 dBm) (CW) |
Typical: |
≤ -50 dBc(320 MHz, >-55 dBm) (CW) |
Input/Output spectral flatness |
Specification: |
≤ ± 1 dB ( ± 160 MHz) |
Typical: |
± 0.75 dB ( ± 160 MHz) |
Input/Output return loss |
>15 dB(400 to 3800MHz) |
>14 dB(3800 to 6000MHz) |
>14 dB(6000 to 7300MHz) |
Input spurious(signal applied) |
< -70 dBc(CW,for signal levels greater than -10 dBm) |
Input Inherent spurious floor (no signal) |
≤ -95 dBm(100 kHz RBW) |
Noise figure |
≤ 26 dB at minimum input attenuation |
Input/Output integrated phase noise |
≤ 0.3 degrees (100 Hz to 1 MHz) 0.2 degrees (100 Hz to 1 MHz) typical |
Output signal to noise ratio |
Specification:≥ 60 dB(100 kHz RBW),power level -10 dBm |
Typical:≥ 70 dB(100 kHz RBW),power level -10 dBm |
Input signal to noise ratio |
≥ 55 dB 100 kHz RBW |
Input/Output return loss |
>13 dB |
Output gap power |
≤ -90 dBm/100 kHz |
Output carrier leakage |
≤ -40 dBc |
Input/Output sampling data rate |
30, 60, 120, 240,480 MHz |
Port to port isolation |
> 110 dB typical |
Input/Output waveform
capture duration
|
at 30 MHz sampling date rate: 800 ms |
at 60 MHz sampling date rate: 400 ms |
at 120 MHz sampling date rate: 200 ms |
at 240 MHz sampling date rate: 100 ms |
at 480 MHz sampling date rate: 50 ms |